Product Description
This is a very substantial mount with Dual arms and nearly 40lbs of steel. The arms extend a Full 27″ from the wall yet fold to less than 4.75″. Even at full extension, this mount has very little sag or twist. It is rated for up to 180lbs and most displays 52″ and smaller weigh under 100lbs. The unit has 4 tilt adjustment knobs and two tilt adjustment screws and it will tilt forward or back 15 degrees. The wall plate is 19″ wide and has wide slots making it easy to mount into standard 16″ studs even if they are not exactly 16″ apart. The dual arms fold outward and are 34″ wide when then pushed all the way against the wall. Thus, the arms may be visible on the sides of 32″ units. The universal design will fit any display with a hole pattern up to 26.3″ wide and 18″ tall. The wall plate is 1/8″ thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. A safety bar is included to prevent accidental liftoff of the display. Installation instructions and hardware included.